PRODUCTS

Product Categories

  • By Color Category

  • By Finish

  • By Application

  • By Range

  • Other Products

LIKE US ON FACEBOOK

Product Information

Selvaggio

Colour : Sage 9823

Description :

This distressed, pull-up leather has been lightly brushed with beeswax to give a pleasant matt appearance.  It is also designed to allow the natural the natural variations of the hide to show through the finished coat.

These are aniline leathers, tanned to ensure a pleasing distressed finish. Extra fat liquors are applied during tannage, to give the leather a waxy feel. The leathers are designed to allow the natural variations of the leather to show through the finished coat. Pull up leathers; do not have a consistent colour density across the whole hide. They are also designed to change colour when pulled or stretched. These types of leathers are not as colour fast as pigmented hides and should be protected from direct sunlight and not placed next to radiators and other heat sources where the wax could dry out. Evidence of marks and scarring will be seen through the surface finish. Each hide is unique and swatch samples should be regarded as no more than a guide for these types of leather. 

Thickness : 0.9/1.0mm.
Average hide size : 54 sq ft (5 sq m)

Suitable for contract, domestic and marine applications

Care Instructions

A slightly dampened cloth and a pure mild soap solution can be used for light marks. However, extra care should be taken, as this type of leather can easily be damaged by spillages and soiling. Do not wet the leather as water staining may occur. Do not use detergent products. Read carefully the labels on proprietary leather products to check that they are suitable for pull up leathers.

Technical Specification

Test Methods

EN ISO 11640  ISO 11641

Leather Characteristics

Colour fastness to-and-fro rubbing

Dry

50 Cycles, min 3 grey scale

Wet

20 Cycles, min 3 grey scale

Perspiration

20 Cycles, min 3 grey scale

Wyzenbeek

20,000 cycles, 4/5 grey scale

Colour fastness to light

Min 3 Blue Scale EN ISO 105-B02

PH and ΔpH

Min 3.2 If the pH value is below 4, ΔpH < 0.7 EN ISO 4045

Tear Strength

Min 20N EN 3377-1

Flammability

CAL-117E – class 1

Whilst these values are typical of those expected, it is advisable to issue appropriate guidance with upholstered furniture to inform consumers of likely performance, as in service, care and maintenance instructions to avoid unnecessary problems.