PRODUCTS
Product Categories
LIKE US ON FACEBOOK
Product Information
Rub-Off
Colour : Blue (5014)
Description :
An extensive range of rub-off antique leathers that have been buffed and corrected to remove imperfections and embossed with a traditional print. The topcoat can be removed to reveal its base coat for a two-tone effect.
Thickness : 0.9/1.1mm.
Average hide size : 50 sqft (4.6 sqm)
Suitable for domestic, contract and marine applications
Care Instructions
This is a variety of pigmented leather embossed with an attractive “Water Buffalo” grain, where the surface is made attractive by the application of a contrasting topcoat that can be partially removed (rubbed off) to reveal the underlying colour that is then sealed with a lacquer.
Cleaning: – a damp cloth and a pure mild soap solution will remove most stains. Care should be taken not to soak the leather. Do not use a detergent.
Technical Specification
Test Methods
EN ISO 11640 ISO 11641
Leather Characteristics
Colour fastness to-and-fro rubbing
Dry
500 Cycles, min 4 grey scale
Wet
250 Cycles, min 3 / 4 grey scale
Perspiration
80 Cycles, min 3 / 4 grey scale
Colour fastness to light
Min 5 Blue Scale EN ISO 105-B02
Finish Adhesion
Min 2N/10mm ISO 11644 Dry Adhesion
Flexing Endurance
50,000 cycles (no finish damage cracks) EN ISO 5402
PH and ΔpH
Min 3.2 If the pH value is below 4, ΔpH < 0.7 EN ISO 4045
Tear Strength
Min 20N EN 3377-1
Whilst these values are typical of those expected, it is advisable to issue appropriate guidance with upholstered furniture to inform consumers of likely performance, as in service, care and maintenance instructions to avoid unnecessary problems.