PRODUCTS
Product Categories
LIKE US ON FACEBOOK
Product Information
Newcastle
Colour : Red Velvet (New17)
Description :
A pure aniline leather, vacuum dried with a blend of oils to achieve a strong pull-up effect and a glossy finish. Natural marks are evident on this article, helping to create an “old saddle” appearance. Made on European hides.
Thickness : 1.0/1.1mm
Average hide size : About 55sqft (5.11 sqm)
Suitable for domestic and contract applications
Care Instructions
Cleaning: – a slightly dampened cloth and a pure mild soap solution can be used for light marks. However, extra care should be taken, as this type of leather can easily be damaged by spillages and soiling. Do not wet the leather as water staining may occur. Do not use detergent products. Read carefully the labels on proprietary leather products to check that they are suitable for aniline leathers.
Technical Specification
Test Methods
EN ISO 11640 ISO 11641
Leather Characteristics
Colour fastness to-and-fro rubbing
Dry
50 Cycles, min 3 grey scale
Wet
20 Cycles, min 3 grey scale
Perspiration
20 Cycles, min 3 grey scale
Wyzenbeek
30,000 cycles, 4 grey scale
Colour fastness to light
Min 3 Blue Scale EN ISO 105-B02
PH and ΔpH
Min 3.2 If the pH value is below 4, ΔpH < 0.7 EN ISO 4045
Tear Strength
Min 20N EN 3377-1
Flammability
CAL 117E – class1
Whilst these values are typical of those expected, it is advisable to issue appropriate guidance with upholstered furniture to inform consumers of likely performance, as in service, care and maintenance instructions to avoid unnecessary problems.