Product Categories

  • By Color Category

  • By Finish

  • By Application

  • By Range

  • Other Products


Product Information


Colour : Jet Black (5134)

Description :

This leather has the appearance and feel of aniline leather but with the durability to withstand everyday use.  Aniline dyed with a hardwearing topcoat it has been lightly corrected to enhance the leathers natural grain. 

Thickness : 0.9/1.0mm.
Average hide size : 50 sqft (4.6 sqm)

Suitable for domestic, contract and marine applications

Care Instructions

These leathers are produced on good quality hides and finished with a pigmented topcoat. The grain has been slightly polished to give an excellent cutting yield but with the look and softness of full grain leather. The effect produces a beautiful feel and finish with excellent durability.

Cleaning: – a damp cloth and a pure mild soap solution will remove most stains. Care should be taken not to soak the leather. Do not use a detergent. 

Technical Specification

Test Methods

EN ISO 11640  ISO 11641

Leather Characteristics

Colour fastness to-and-fro rubbing


500 Cycles, min 4 grey scale


250 Cycles, min 3 / 4 grey scale


80 Cycles, min 3 / 4 grey scale


30,000 Cycles, 5 grey scale

Colour fastness to light

Min 5 Blue Scale EN ISO 105-B02

Finish Adhesion

Min 2N/10mm ISO 11644 Dry Adhesion

Flexing Endurance

50,000 cycles (no finish damage cracks) EN ISO 5402

PH and ΔpH

Min 3.2 If the pH value is below 4, ΔpH < 0.7 EN ISO 4045

Tear Strength

Min 20N EN 3377-1


CAL-117E -class 1

Whilst these values are typical of those expected, it is advisable to issue appropriate guidance with upholstered furniture to inform consumers of likely performance, as in service, care and maintenance instructions to avoid unnecessary problems.